BERICAP at Interpack 2011

Screw-caps for blow-moulded plastic canisters The BERICAP family of DIN closuresIllustration: SVB 45 + SVB 60   A number of years ago, BERICAP developed a product family of screw-caps for blow-moulded plastic canisters with DIN-compliant necks which were distinct from other DIN-compliant closures due to their modified external design. A tamper-evident band was developed for these closures which ensures that the closures are reliably secured and at the same time easy to open when used for first time. All closures can also be supplied with degassing valves.This development has been received by the market as a welcome improvement - as proved by the impressive increase in sales figures.To meet market requirements, a version has been developed with a pull-up spout for container necks of DIN 60mm diameter of thread. As a result, accurate dosing and precision pouring is noticeably easier. This is particularly important in applications involving motor oil, lubricating oils for garden appliances and agricultural equipment, cleaning materials supplied in large format packaging, etc. There’s also a handy spout adapter for customers using DIN 45 thread containers.The product range for blow-moulded plastic canisters has also been supplemented by a screw-cap for a DIN 60 neck with an inlaid aluminium gasket.Successful metal packaging closure Pull-up spout increases product useA number of years ago, BERICAP developed the P2 REL ALU closure. This was used for metal packaging punched with a 42mm REL aperture.The closure has a pull-up spout and when unopened is covered with a welded-on aluminium foil seal. The aluminium foil seal prevents volatile gases from the product from escaping after the filling process right through to use on the customer’s premises.While the customer has the benefit of a pull-up spout feature, the closure still sits flush with the top of the canister and the height or the stacking of canisters is not affected.The ever-stricter requirements on packaging functionality have led to a constant increase in demand for the P2 REL ALU closure.Closures for the agrochemical industry Protection against product piracyIllustration: Bayer   Product piracy and the forgery of filled product are a serious problem when it comes to chemical products for the agricultural sector. BERICAP has developed a comprehensive range of closures for the agrochemical industry to protect such sensitive filling processes against counterfeiting and manipulation.All closures have a folded guarantee band which is hard to manipulate and is visibly torn once the closure has been opened. Further protection is also afforded by using customer-specific designs and attaching a safety label over the guarantee band.BERICAP will be introducing an appropriate range of closure solutions at INTERPACK.As an option, BERICAP also supplies canister handles to agrochemicals fillers so that containers can be safely handled. C. New products for technical application Telescopic closures for motor oilIllustration: SVT 37.5   The widening of the BERICAP product range for motor oil packaging with the new SVT 37.5 telescopic closure has been well received by the market.This new development has a double tamper-evident seal: one is applied directly to the screw-top cap and a second - in the form of a bridge seal on the smaller top closure which secures the telescopic tube - puts the final seal on it.The telescopic tube is especially useful as it provides access to hard-to-reach places for filling.At its next stage of development, this version of the closure will be further developed for a 38mm standard thread as predominantly used in the automotive sector. This then paves the way for application on the 1 litre containers currently on the market.Weight-reduced closures for edible oil New range of closures saves on materials and costsIn large parts of the edible oil industry, the standard 29/21 neck weighing 2.74 g is used for 1 litre PET bottles. This necjk size was developed at a time when plastic closures were meant to fit both glass bottles and PET bottles. Today edible oil is predominantly packed in PET bottles and so BERICAP has developed a range of closures for a 26mm bottle neck diameter to support the move towards saving on costs and materials. The new closure neck weighs a mere 1.37 g.The inner diameter of the new neck is identical to the previous 29mm diameter, thus eliminating the need for costly modifications to filling plant and still providing the same flow rate.BERICAP will be launching this new range of closures which contains one-piece and two-piece versions with a range of different design features at INTERPACK 2011.Through this development, BERICAP is able to support the efforts of its customers to save on costs and materials and reduce the impact on the environment with lower CO2 emissions.Illustration: Bottle with CTC 26/10 closure   Bottle with CTC IP 26/12 closure B. New products for the food sector Valve closures made from one materiall Inexpensive and environmentally friendly closures for squeezable productsIllustration: Ketchup closure   Handy closures with silicon valves have been on the market for a number of years, particularly for ketchup and mayonnaise. By squeezing the bottle, the user is able to dispense a portion from the contents of the bottle. As well as the high cost of the silicon valve, this presents issues for recycling, as it results in the contamination of plastic recycled material.The new valve design developed by BERICAP has now found its first commercial application and consists of two parts, both of which are manufactured from the same material. By squeezing the bottle, the user dispenses products of paste-like consistency, such as ketchup and mayonnaise, in well-dosed portions - and with no messy splattering.As the valve and the closure are made from the same raw material, a solution has now been created that is both inexpensive and recycling friendly.The bottles with the 33 closure are noticeably different to conventional drinks products and promote striking visual product differentiation and demarcation at PoS.The 33mm closure is based on the BERICAP DoubleSeal™ and can be used on all current models of aseptic packaging plant in dry or wet sterilisation processes. The closure is fitted with a folded and pre-cut tamper-evident band which breaks when first opened.2. The BERICAP PUSH PULL Next Generation Sports cap for aseptic filling guarantees high flow ratesIllustration: BERICAP PUSH PULL Sports Cap Next Generation 38mm / Group Picture   Sports closures are ideally suited for on-the-go consumption or for hydration on the journey or during sport, when consumers want a fast and simple method of closing drinks bottles. To enjoy the maximum taste experience from a beverage, the bottle needs to allow as much product as possible to enter the mouth in a short time.The BERICAP PUSH PULL Next Generation meets these requirements. The closure requires no aluminium foil seal so that the consumer can drink from the bottle as soon as the protective cap is removed. This sports closure combines consumer-friendly functionality with an approx. 30% higher flow rate compared to conventional products and as a result has enjoyed increasing acceptance in the market and with the consumer since its introduction in 2010.The 3-part PUSH PULL Next Generation is fitted with DoubleSeal™ technology, which has been successful in the market when used for other BERICAP closures. The closure is suitable for use in aseptic filling and for both wet and dry sterilisation processes. N2 dosing of the bottle is possible in aseptic filling processes.With many years of experience in one-piece closures for hot filling in PET, BERICAP has been a driving force in the development of lightweight closures, particularly in conjunction with weight-reduced bottle necks. Tests have shown that the BERICAP DoubleSeal™ System protects the bottle neck against deformation in hot filling to such an extent that significant savings in materials can be made without jeopardising the safety of the filled product.Bottle necks are therefore set to become lighter in future for both the 38mm and 28mm PET bottles currently on the market. A 33mm neck size will shortly complement the product range for closures in the hot fill sector.New products for aseptic filling1. DoubleSeal™ 33 mm – smaller opening for easy-to-drink bottlesIllustration: DoubleSeal™ 33   Since the 90s, 38mm closures have been used almost exclusively in aseptic filling for both miniature packaging for “on-the-go” consumption and for larger sized packaging.To achieve the required cost savings and lower CO2 emissions, BERICAP has developed a 33mm closure which was developed for the market together with a bottle neck co-designed with Sidel. Launch took place in 2010 with Spanish juice processor, Garcia Carrión.Consumers find drinking from a smaller bottle neck more enjoyable and fillers profit from the lower costs delivered by an approx. 30% weight-saving on a 38mm neck.A. New products for the beverage sector Saving weight with one-piece closures for hot-filled PET packagingIllustration: “Tingo”, Egypt   It was back in 2003 that BERICAP introduced the first one-piece closures for hot filling in PET to the Chinese market. Since then it has enjoyed success in hot filling applications in many countries of Asia and Europe.The one-piece 38mm closure for hot filling in PET was recently introduced in Egypt by BERICAP together with juice processor, JUHAYNA, and a leading German manufacturer of baby juices has also just decided to use the one-piece 38mm closure for its juices, which are hot-filled in PET bottles.BERICAP will once again be exhibiting at this year’s Interpack trade fair in Düsseldorf.In Hall 10, Stand E 67, on an exhibition stand of over 180 m² in size, the international closure manufacturer will be displaying its range of proven products and new developments aimed at a variety of markets such as the beverage, food, automotive, chemical and agrochemical industries.This year’s spotlight falls directly on the subject of “Lightweight Design”. Whereas in the past lighter closures tended to be developed more for carbonated drinks and still water, today greater attention is being given to the ongoing development of lighter packaging for aseptic filling and hot-filling processes.New developments have been launched for the food market - specifically for edible oil and squeezable products.As well as benefitting from cost savings generated by using lighter closures, manufacturers are also concerned with conserving non-renewable resources and reducing the greenhouse gas effect.The demand in technical applications is for closures that protect contents from counterfeiting. This is all the more important as global players in the chemical industry need to protect their products against product piracy particularly where these are manufactured in developing countries.

Martina Mussel

Communication & Marketing

Tel. +49 (0)6139 29 02 120

Fax +49 (0)6139 29 02 188

Martina.Mussel(at)bericap.com